• Bokmål
  • English


- XML model

- XML model

Main | Mathematical Methods | CRAVA User Guide Download

XML Model | Inversion | Estimation | Forward modelling | Rock Physics | Facies Predictions

Running CRAVA is based on xml files. A single xml file is used with a CRAVA run and it contains all information regarding input files, different settings and output results. These files must be edited with a text editor / xml editor.

All keywords starts and ends with a tag, e.g. <crava> and </crava>.

The CRAVA user manual contains list of all available keywords and a description of each.

Examples of the xml files can be downloaded in the Download page, which can be used as a starting point when setting up a CRAVA model.

Main keywords examples


Specifies running mode (inversion, estimation or forward model), and whether it is a prediction or simulation run.

  <mode> inversion </mode>
    <prediction> yes </prediction>


Survey keyword is used for specifying the seismic data and wavelets.

    <offset-angle> 16 </offset-angle>
      <file-name> SeismicCube16.segy </file-name>
        <file-name>wavelets/Wavelet_16.0deg.wlt  </file-name>

The wavelet can be given from file (as shown), or be estimation (no <wavelet> keyword), or it is possible to use a ricker wavlet (with a <ricker> keyword instead of <file-name>).

Under <wavelet> it is also possible to give a <scale> value to scale the wavelet from file or ricker, or Crava can estimate the scale by using <estimate-scale>.


Specifies input wells and the log names.

    <time>     TWT    </time>
    <dt>          DT      </dt>
    <dts>        DTS    </dts>
    <density> RHOB </density>
    <file-name> Well1.rms </file-name>

Crava supports both rms and las wells. Each well can also be specified if what it should be used for with the keywords <use-for-wavelet-estimation>, <use-for-background-trend>, <use-for-facies-probabilities> and <use-for-rock-physics>.


Information about the prior-model, background, correlation, correlation-directions, facies probabilities and rock-physics is specified under <prior-model>

    <high-cut-background-modelling> 6 </high-cut-background-modelling>
      <variogram-type> genexp </variogram-type>
      <range>        2000 </range>
      <subrange>  1000 </subrange>
      <angle>            70 </angle>
      <power>             1 </power>
      <top-conform> yes </top-conform>

The background model can either be estimated (as above), given from file (<vp-file>), a constant value (<vp-constant>) or taken from rock physics.

Correlation settings are also set her. These include <lateral-correlation> variogram, <correlation-direction> as shown above. Also <parameter-correlation> and <temporal-correlation> can be given here, if they should not be estimated by Crava.

<facies-probabilities> can be given under <prior-model>, where <prior-probabilities> and <volume-fractions> can be given.

<rock-physics> is also specified here. The base structure of the rock physics template consists of the elements <reservoir>, <evolve>, <predefinition>, <rock> and <trend-cube>, each of which contains sub-elements. The sub-elements will be basic building blocks (e.g. <solid>, <fluid>, <dry-rock>), properties (e.g. temperature, pore-pressure, density, etc) and theories.

Project settings

Specifies output/inversion volume and other input/output-settings. The area can be utm-coordinates, inline-crossline-number or taken from a surface. The volume is specified either with interval-one-surface (and a thickness), interval-two-surface or multiple interval.


      <reference-point-x>  1000 </reference-point-x>
      <reference-point-y>  5000  </reference-point-y>
      <length-x>                4500  </length-x>
      <length-y>                4500  </length-y>
      <angle>                          0  </angle>
      <sample-density-x>       50 </sample-density-x>
      <sample-density-y>       50 </sample-density-y>

        <time-file>   TopSurface.storm </time-file>
        <time-file>   BaseSurface.storm </time-file>
      <number-of-layers>   100 </number-of-layers>

    <input-directory>    input/   </input-directory>
    <output-directory>  output/ </output-directory>

        <storm>    yes </storm>
        <ascii>       no  </ascii>

        <vp>                 yes </vp>
        <vs>                 yes </vs>
        <density>         yes </density>
        <background>   yes </background>

      <blocked-wells> yes </blocked-wells>

        <jason> yes </jason>
      <well-wavelets>    yes </well-wavelets>
      <global-wavelets> yes </global-wavelets>

      <prior-correlations> yes </prior-correlations>



Norsk Regnesentral
Postboks 114 Blindern
0314 Oslo
Norsk Regnesentral
Gaustadalleen 23a
Kristen Nygaards hus
0373 Oslo
(+47) 22 85 25 00
Adresse Hvordan komme til NR
Sosiale media Del på sosiale media
Personvernerklæring Personvernerklæring
Postadresse: Norsk Regnesentral, Postboks 114 Blindern, 0314 Oslo
Besøksadresse: Norsk Regnesentral, Gaustadalleen 23a, Kristen Nygaards hus, 0373 Oslo
Tlf: (+47) 22 85 25 00
AdresseHvordan komme til NR